EXECUTE
RETURN
NAV I GAT I ON
DELETE CURRENT?

EN 49

●The “NAVIGATION SEARCH” indication appears blinking and the camcorder starts searching the tape for the relevant point of the selected thumbnail image.

To cancel NAVIGATION search midway...

Press 4/9, 3, 5 or 8.

To add thumbnail images during video playback

1Perform steps 1 to 4 in “To find scenes on tape using thumbnail images (NAVIGATION Search)”.

2Press 4/9 to start video playback.

3Press NAVI STORE at the desired point.

●The “ ” indicator appears briefly and the image of the point where NAVI STORE is pressed is stored in the memory card as a thumbnail image.

To delete thumbnail images

1Load a memory card. ( pg. 16)

2Set the VIDEO/MEMORY switch to “VIDEO”.

3Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

4Press the MENU Wheel in. The Menu Screen appears.

5Rotate the MENU Wheel to select “t”, and press it. The VIDEO Menu appears.

CAUTION:

Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during deletion. If the memory card becomes corrupted, initialize it.

NOTE:

Once images are deleted, they cannot be restored. Check images before deleting.

IMPORTANT:

● Be sure to always use the same tape and memory

card together as they were during recording;

otherwise, the camcorder cannot recognize Tape

and Memory Card IDs to perform NAVIGATION

function properly.

● Check if an appropriate tape and memory card are

loaded when the following messages appear: “NO

ID ON TAPE OR CARD”, “UNABLE TO USE

NAVIGATION”, “THIS MEMORY CARD IS NOT

COMPATIBLE”.

● If you change the memory card while shooting on

one tape, two memory cards will share the tape’s

thumbnail images. We recommend that you use

one memory card for one tape.

● NAVIGATION Search does not work if the current

position is at a blank portion on the tape. Also, do

not leave a blank portion partway through the tape

when shooting; otherwise, NAVIGATION function

does not work properly.

● Before shooting newly over a recorded tape, be

6Rotate the MENU Wheel to select “NAVI.DEL.”, and press it. The Sub Menu appears.

7By rotating the MENU Wheel...

 

 

V I DEO

 

 

 

 

SOUND MODE–

STEREO

 

 

 

 

1 2 b i t MODE–

SOUND 1

SYNCHRO

–

± 0 . 0

 

 

REC MODE

–

 

 

 

 

 

 

COPY–

OFF

NAV I . DEL .

 

 

 

 

 

S / AV I NPUT

–

OFF

RETURN

sure to delete all thumbnail images of the previous

recording from the relevant memory card.

● If you copy thumbnail images from one memory

card to another via a PC, NAVIGATION Search

does not work with the copied memory card.

Select “IMAGE SEL.” to delete the currently displayed thumbnail image.

Select “TAPE SEL.” to delete all thumbnail images for the tape which contains the currently displayed image.

Select “ALL” to delete all thumbnail images stored in the memory card at once.

8 Press the MENU Wheel in. The NAVIGATION screen

appears.

9 Rotate the MENU Wheel to DEC 2 6 ’ 0 3 3 : 0 0PM select “EXECUTE”, and

press it.

●Press 3 to display the previous page. Press 5 to display the next page.

●To cancel deletion, select “RETURN”.

●Thumbnail images cannot be deleted during video playback.