6 EN

How To Attach The Core Filter (GR-DV800/500 only)

(for optional editing cable)

Attach the core filter to an optional editing cable. The core filter reduces interference.

1Release the stoppers on both ends of the core filter.

Stopper

2Run the cable through the core filter, leaving approx. 3 cm (1-3/16") of cable between the cable plug and the core filter. Wind the cable twice around the outside of the core filter as shown in the illustration.

● Wind the cable so that it is not slack.

3 cm (1-3/16")

Wind twice.

3Close the core filter until it clicks shut.

NOTES:

●Take care not to damage the cable.

●When connecting a cable, attach the end with the core filter to the camcorder.

How To Use The Audio Cable

When using optional headphones or external microphone, connect to the provided Audio cable (with a core filter attached), then connect the Audio cable to the camcorder. The core filter reduces interference.

Microphone

Headphones

Audio cable (provided)

Open the connector cover.

To MIC Core filter

To (headphones)