JVC GR-DVL120 specifications 40 EN, Lock hole, Knob Remote sensor

40 EN USING THE OPTIONAL REMOTE CONTROL UNIT

A

1

2

3 1

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible.

Installing The Battery (RM-V700U, optional)

B

2

Lock hole

3

The remote control uses one lithium battery (CR2025).

1There are 2 ways to pull the battery holder out of the RM-V700U.

: Pull out the battery holder while sliding the lock hole.

: Pinch the release tab and pull out the battery holder.

1

Knob

1

Remote sensor

2 Insert the battery in the holder, and be sure to have the “+” mark visible.

3 Slide the holder back in until you hear a click.

•Read the caution concerning lithium batteries in the RM-V700U instruction manual.

When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s approximate effective distance for indoor use is 5m.

The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.