JVC GR-DVL357, GR-DVL150, GR-DVL157, GR-DVL557, GR-DVL555, GR-DVL450 Recording Mode Setting, EN13

MENU/BRIGHT Wheel

Power Lamp

Lock Button

Power Switch

Display

			Menu Screen
REC MODE	–	SP
		LP
			Sub Menu

GR-DVL557/DVL555/

DVL357/DVL355 only

EN13

Recording Mode Setting

Set the tape recording mode depending on your preference.

1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on.

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3 Rotate the MENU/BRIGHT wheel to select

“ CAMERA” and press it. The CAMERA Menu appears.

4 Rotate the MENU/BRIGHT wheel to select “REC MODE” and press it. The Sub Menu appears. Select “SP” or “LP” by rotating the MENU/BRIGHT wheel and press it. Rotate the MENU/BRIGHT wheel to select “1RETURN”, and press it twice. The Menu Screen closes.

•Audio Dubbing (
pg. 66) and Insert Editing

(
pg. 67) are impossible on a tape recorded in the LP mode.

•“LP” (Long Play) is more economical, providing 1.5 times the recording time.

NOTES:

●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.