JVC GR-DVL355, GR-DVL150, GR-DVL157 68 EN, Using DV cable, AUsing USB or PC connection cable

68 EN SYSTEM CONNECTIONS

[A]Using USB or PC connection cable

GR-DVL450/DVL157/DVL150 only

To PC	PC connection cable	To
	(provided with GR-DVL450/
		RS-232C
(DIGITAL PHOTO)	DVL157 only)
To USB	USB cable	To USB
	(provided)	connector
GR-DVL557/DVL555/DVL357/DVL355 only
[B] Using DV cable	OR
Power Switch
Core filter		Core filter
To DV	DV cable	To DV
	(optional)	connector

VIDEO/DSC Switch (GR-DVL557/DVL555/DVL357/

DVL355 only; open the LCD monitor to access this switch.)

PC

PC with DV connector

Connection To A Personal Computer

[A] Using USB or PC connection cable This camcorder can transfer still images to a PC by using the software (GR-DVL557/DVL555/DVL450/ DVL357/DVL355/DVL157: provided, GR-DVL150: optional software HS-V16KIT).

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Make sure the camcorder and PC are turned off.

Connect the camcorder to your PC using the
2 appropriate cable as shown in the illustration.
For GR-DVL557/DVL555/DVL357/DVL355
3 Owners: If you are using the USB connection,
set the VIDEO/DSC switch to “DSC”.
•Only the still images stored in the memory
card can be transferred to a PC.
Turn the camcorder’s Power Switch to “	”

4 while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

5 When finished, turn off the PC first, then the camcorder.

NOTES:

●It is recommended to use the AC Adapter as the

power supply instead of the battery pack ( pg. 9).

●Never connect the USB or PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●The system may not work properly depending on the PC or capture board you are using.

For GR-DVL557/DVL555/DVL357/DVL355 Owners:

“USB MODE” and/or “ACCESSING FILE” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while

“ACCESSING FILE” is displayed on the LCD monitor since this can result in product damage.