JVC GR-DVL357, GR-DVL150, GR-DVL157, GR-DVL557, GR-DVL555, GR-DVL450, GR-DVL355 specifications 76 EN

76 EN		TROUBLESHOOTING (cont.)
	SYMPTOM	POSSIBLE CAUSES	CORRECTIVE ACTION
	35. The LCD monitor image is	35. • During playback of the	35.
	distorted.	unrecorded portion, High-
		speed Search and still	————
		playback, LCD monitor
		indications appear distorted.
		This is not a defect.
	36. Images on the LCD monitor	36. • The speaker volume is too	36. • Turn the speaker volume
	are jittery.	great.	down ( pg. 21).
	37. There is no playback picture	37. • Since the analogue input mode	37. • Set “S/AV INPUT” to “OFF” in
	on the connected TV.	is engaged, the camcorder is in	the Menu Screen ( pg. 50).
		the Record-Standby mode.
	38. Blocks of noise appear	38.	38. • Clean the video heads with an
	during playback, or there is	————	optional cleaning cassette
	no playback picture and the		( pg. 86).
	screen becomes blue.
	39. The LCD monitor, the	39.	39. • Wipe them gently with soft
	viewfinder and the lens have	————	cloth. Wiping strongly can
	become dirty (ex. finger-		cause damage ( pg. 77).
	prints).
	40. An unusual mark appears.	40.	40. • Check the section of the
		————	manual that explains LCD
			monitor/viewfinder indica-
			tions ( pg. 80 – 84).
	41. An error indication	41. • A malfunction of some kind	41. • Remove the power supply
	(E01 — E06) appears.	has occurred. In this case the	(battery pack, etc.) and wait a
		camcorder’s functions	few minutes for the indication
		become unusable.	to clear. When it does, you
			can resume using the
			camcorder.
			If the indication remains even
			though you repeat the above
			two or three times, please
			consult your nearest JVC
			dealer.
	42. The charger indicator on the	42. • The temperature of the battery	42. • To protect the battery, it is
	camcorder does not light.	is extremely high/low.	recommended to charge it in
		• Charging is difficult in places	places with a temperature of
		subject to extremely high/low	10°C to 35°C ( pg. 85).
		temperatures.
	43. When the image is printed	43. • This is not a malfunction.	43. • By recording with “DIS”
	from the printer, a black bar		activated ( pg. 47) this can
	appears at the bottom of the		be avoided.
	screen.
	44. When the camcorder is	44. • The DV cable was plugged/	44. • Turn the camcorder’s power
	connected via the DV	unplugged with power turned	off and on again, then operate
	connector, the camcorder	on.	it.
	does not operate.
	45. The memory card cannot be	45.	45. • Push in the memory card a
	removed from the	————	few more times ( pg. 14).
	camcorder.