JVC GR-DVL150, GR-DVL157, GR-DVL557, GR-DVL555, GR-DVL450 28 EN, Auto Playback, Power Switch to

28 EN D.S.C. PLAYBACK

Fast-Forward (3)

Button

Play (4/6) Button

Rewind (2)

Button

Stop (5) Button

Lock Button

			OFF
		Y
	A
P	L

Power Switch

Normal Playback

Images shot with the camcorder are automatically numbered, then stored in numerical order in the memory card. You can view the stored images, one at a time, much like flipping through a photo album.

1 Load a memory card (
pg. 14).

Set the VIDEO/DSC Switch to “		”, then set the
2 Power Switch to “	” while pressing down the

Lock Button.

•A stored image is displayed.

3 Press 3to display the next image. Press 2to display the previous image.

VIDEO/DSC Switch (Open the LCD monitor to access this switch.)

Auto Playback

[For Normal Playback]		[For Auto Playback]		You can run through all the images stored in memory
To display the next image				automatically.
	Display			1	Perform steps 1 and 2 above.
		100-0010
		10 / 24
				2	Press 4/6.
					•If you press 2during Auto Playback, images are
					displayed in descending order.
	10. 10. 01				•If you press 3 during Auto Playback, images are
					displayed in ascending order.
		100-0011		3 To end Auto Playback, press 5.
		11 / 24
				NOTES:
	10. 10. 01			● Even if you shoot a new image after playing back a low-
		100-0012		numbered one, this will not overwrite an existing image,
				because new images are automatically stored after the
		12 / 24
				last-recorded one.
				● Images shot in a file size other than VGA with devices
				that are compatible with DCF (Design rules for Camera
				File systems) will be displayed as reduced-size thumb-
	10. 10. 01			nail images. These thumbnail images cannot be
				transferred to a PC.
		100-0013		● Images shot with devices that are not compatible with
		13 / 24		DCF cannot be viewed with this camcorder; “Unsup-
				ported Data!” will be displayed.
			Directory and File names
			Displays the directory and file names.
	10. 10. 01		Shows that the selected shot is in a directory called “100” and its file name is
			“DVC00013”.
To display the	Image number		Each time shooting takes place, a file name is made using a number which is
	Displays the index		larger by one than the largest number of the file names which are in use. If the
previous image
	number of the image		file name reaches DVC09999, a new directory will be made and the file name
	file ( pg. 29).		will start again from DVC00001.
			In the playback screen, the directory and only the last four digits of the file name
Date			are displayed.
Displays the date when the image was			Total number of images
shot (if “DATE/TIME” is set to “ON” in
the Menu Screen pg. 50 – 51).			Displays the total number of stored images.