JVC GR-DVL357, GR-DVL150, GR-DVL157, GR-DVL557 Dubbing Images Stored In a Memory Card, EN55

SNAPSHOT Button

Lock Button

Power Switch

Rewind Button (2)

Fast-Forward Button (3)

VIDEO/DSC Switch (Open the LCD monitor to access this switch.)

	Display
TO COPY TO TAPE
PUSH	“SNAPSHOT”

REC

EN55

Dubbing Images Stored In A Memory Card

To A Tape (GR-DVL557/DVL555/DVL357/DVL355 only)

Images can be dubbed from a memory card to a tape.

1 Load a memory card (
pg. 14) and cassette (
pg. 12).

2 To locate the point where you wish to dub a still image, play back the tape. Stop playback at the desired point.

3 Set the VIDEO/DSC Switch to “ ”, then set the

2

Power Switch to “ ” while pressing down the Lock Button located on the switch.

4 To select a still image to be dubbed, perform Index

3

Playback (
pg. 29), Auto Playback (
pg. 28) or press 2or 3 to select the image you wish.

5 To engage Dub-Standby, press SNAPSHOT. The message “TO COPY TO TAPE PUSH "SNAPSHOT"” appears.

6 While the message is being displayed, press SNAPSHOT. The selected still image is recorded on the tape for approx. 5 seconds.

•The indicator disappears when dubbing is complete.

NOTE:

If SNAPSHOT is pressed in step 5 when the tape’s erase protection tab is set to “SAVE”, the message “COPYING FAILED” is displayed.