EN 13

MENU/BRIGHT Wheel

Power Lamp

Power Switch

Lock Button

Recording Mode Setting

Set the tape recording mode depending on your preference.

1 Set the Power Switch to “

” while pressing

MANUAL

 

down the Lock Button located on the switch. The power lamp lights and the camcorder is turned on.

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3 Rotate the MENU/BRIGHT wheel to select

CAMERA” and press it. The CAMERA Menu appears.

4 Rotate the MENU/BRIGHT wheel to select “REC MODE” and press it. The Sub Menu appears. Select “SP” or “LP” by rotating the MENU/BRIGHT wheel and press it. Rotate the MENU/BRIGHT wheel to select “ RETURN”, and press it twice. The Menu Screen closes.

Display

REC MODE – SP LP

Menu Screen

•Audio Dubbing ( pg. 63) and Insert Editing

( pg. 64) are possible on tapes recorded in the SP mode.

•“LP” (Long Play) is more economical, providing

1.5times the recording time.

Sub Menu

GR-DVL720/DVL520 only

NOTES:

●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.