20 EN

TAPE RECORDING (cont.)

Time Code

During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback.

If recording starts from a blank portion, the time code begins counting from “00:00:00” (minute:second:frame). If recording starts from the end of a previously recorded scene, the time code continues from the last time code number.

To perform Random Assemble Editing ( pg. 58 – 62), time code is necessary. If during recording a blank portion is left partway through the tape, the time code is interrupted. When recording is resumed, the time code starts counting up again from “00:00:00”. This means the camcorder may record the same time codes as those existing in a previously recorded scene. To prevent this, perform “Recording From The Middle of A Tape” below in the following cases;

When shooting again after playing back a recorded tape.

When power shuts off during shooting.

When a tape is removed and re-inserted during shooting.

When shooting using a partially recorded tape.

When shooting on a blank portion located partway through the tape.

When shooting again after shooting a scene then opening/closing the cassette holder cover.

Display

 

 

 

 

Frames are not displayed

 

 

 

 

during recording.

 

 

 

 

 

 

Minutes

 

 

 

 

 

 

 

 

 

 

 

Seconds

 

 

 

 

 

 

 

 

 

 

 

 

Frames

 

 

 

 

 

 

(30 frames = 1 second)

12 : 34 : 24

 

 

 

 

 

Recording From The Middle Of A Tape

1.Play back a tape or use Blank Search ( pg. 24) to find the spot at which you want to start recording, then engage the Still Playback mode ( pg. 21).

2. Set the Power Switch to “

” or “

” while pressing down the Lock Button located on the switch,

AUTO

MANUAL

 

then start recording.

 

 

NOTES:

The time code cannot be reset.

During fast-forwarding and rewinding, the time code indication does not move smoothly.

The time code is displayed only when “TIME CODE” is set to “ON”( pg. 47, 48).

When a blank portion is recorded on a tape

Time code

 

 

Time code

Time code

 

00:00:00

 

 

05:43:21

00:00:00

 

Tape

 

 

 

 

 

 

 

 

Already recorded scene

 

Blank

 

 

Newly recorded scene

 

 

 

 

 

 

Shooting start point

Shooting stop point

Shooting start point

Proper recording

 

 

 

 

 

 

Time code

 

 

Time code

Time code

 

00:00:00

 

 

05:43:21

05:44:00

 

 

 

 

 

 

Tape

 

Already recorded scene

 

New scene

 

Latest scene

 

 

 

 

 

 

 

 

 

Shooting start point

Shooting start point

Shooting start point