EN 47
SYSTEM
DISPLAY
DEMO | OFF | Automatic demonstration will not take place. | |
MODE |
|
| |
ON | Demonstrates certain functions such as Program AE with special effects, etc., | ||
| |||
|
| and can be used to confirm how these functions operate. | |
|
| Demonstration starts in the following cases: | |
|
| • When the Menu Screen is closed after “DEMO MODE” is turned “ON”. | |
|
| • With “DEMO MODE” set to “ON”, if there is no operation for about 3 minutes | |
|
| after the Power Switch is set to “AUTO ” or “MANUAL ” . | |
|
| Performing any operation during the demonstration stops the demonstration | |
|
| temporarily. If no operation is performed for more than 3 minutes after that, the | |
|
| demonstration will resume. |
NOTES:
●If a tape is in the camcorder, the demonstration cannot be turned on.
●“DEMO MODE” remains “ON” even if the camcorder power is turned off.
●If “DEMO MODE” remains “ON”, some functions will not be available. After viewing demo, set to “OFF”.
CAM | CANCEL | Does not reset all settings to the |
|
| |
RESET |
|
|
|
| |
EXECUTE | Resets all settings to the |
|
| ||
|
|
| |||
ON | LCD | Keeps the camcorder’s display (except the date, time and time code) from | |||
SCREEN |
| appearing on the connected TV screen. |
|
| |
|
|
| |||
| LCD/TV | Makes the camcorder’s display appear on screen when the camcorder is | |||
|
| connected to a TV. |
|
| |
DATE/ | OFF | The date/time does not appear. |
|
| |
TIME |
|
|
|
| |
AUTO | Displays the date/time for approx. 5 seconds in the following cases: | ||||
| |||||
|
| AUTO | MANUAL | ”. | |
|
| • When the Power Switch is set from “OFF” to “ | ” or “ | ||
|
| • When tape playback starts. The camcorder displays the date/time when | |||
|
| scenes are recorded. |
|
| |
|
| • When the date is changed during tape playback. |
|
| |
| ON | The date/time is always displayed. |
|
| |
|
|
|
|
| |
TIME | OFF | Time code is not displayed. |
|
| |
CODE |
|
|
|
| |
ON | Time code is displayed on the camcorder and on the connected TV. Frame | ||||
| |||||
|
| numbers are not displayed during recording. |
|
|
CLOCK ADJ.Allows you to set the current date and time ( pg. 11).
QUALITY | Refer to “Picture Quality/Image Size Setting”( pg. 14). | ||||
IMAGE SIZE |
| ||||
REC |
|
|
|
| When Snapshot recording is performed with the VIDEO/MEMORY Switch set |
SELECT |
|
|
|
| to “VIDEO”, still images are recorded only onto the tape. |
|
|
|
|
|
|
|
|
|
| / | When Snapshot recording is performed with the VIDEO/MEMORY Switch set |
|
| ||||
|
| ||||
|
|
|
|
| to “VIDEO”, still images are recorded not only onto the tape but also on the |
|
|
|
|
| |
|
|
|
|
| memory card (640 x 480 pixels). In this mode, the “SNAP MODE” selection in |
|
|
|
|
| the CAMERA Menu is also applicable to memory card recording. |
|
|
|
|
|
|
:
NOTES:
|
|
| MANUAL |
|
● “ SYSTEM” and “ | DISPLAY” functions which are set when the Power Switch is set to “ | ” are also applied |
when the Power Switch is set to “PLAY”( pg. 48). “CLOCK ADJ.” only appears when the Power Switch is set to
MANUAL | ”. |
|
|
|
“ |
|
|
| |
● Settings made in the “ | DISPLAY” Menu remain effective even when the Power Switch is set to “ | ”. However, | ||
|
|
| AUTO |
|
|
| MANUAL | ”. |
|
the menu settings can be changed only when the Power Switch is set to “ |
|
●The date indication can also be turned on/off by pressing the DISPLAY Button on the remote control (provided with