EN 23

1 Make sure all units are turned off.

NOTES:

● It is recommended to use the AC Adapter as the

2 Connect the camcorder to a TV or VCR as shown

power supply instead of the battery pack ( pg. 9).

in the illustration ( pg. 22).

● The S-Video cable is optional. Be sure to use the

YTU94146A S-Video cable.

If using a VCR . . . go to step 3.

Consult the JVC Service Center described on the

If not . . . go to step 4.

sheet included in the package for details on its

3 Connect the VCR output to the TV input, referring

availability. Make sure to connect the end with a

core filter to the camcorder. The core filter reduces

to your VCR’s instruction manual.

interference.

4 Turn on the camcorder, the VCR and the TV.

● To monitor the picture and sound from the camcorder

5 Set the VCR to its AUX input mode, and set the

without inserting a tape or memory card*, set the

camcorder’s Power Switch to “AUTO ” or “MANUAL ”,

TV to its VIDEO mode.

then set your TV to the appropriate input mode.

To choose whether or not the following displays

* GR-DVL720/DVL520 only

● Make sure you adjust the TV sound volume to its

appear on the connected TV . . .

minimum level to avoid a sudden burst of sound when

• Date/Time

the camcorder is turned on.

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the● If you have a TV or speakers that are not specially

Menu Screen ( pg. 48).

shielded, do not place the speakers adjacent to the TV

Or, press DISPLAY on the remote control

as interference will occur in the camcorder playback

(provided with GR-DVL720 only) to turn on/off

picture.

the date indication.

● While the Audio/Video cable is connected to the AV

• Time Code

connector, sound cannot be heard from the speaker.

..... set “TIME CODE” to “ON” or “OFF” in the Menu

 

Screen ( pg. 48).

 

• Playback Sound Mode, Tape Speed And Tape

 

Running Displays for tape playback

 

..... set “ON SCREEN” to “LCD” or “LCD/TV” in the

 

Menu Screen ( pg. 48).