Warning Indications

Indications

CHECK TAPE’S ERASE

PROTECTION TAB

HEAD CLEANING

REQUIRED USE

CLEANING CASSETTE

CONDENSATION

OPERATION PAUSED

PLEASE WAIT

TAPE!

TAPE END

DIFFERENT

FORMATTED TAPE

SET DATE/TIME!

LENS COVER

A. DUB ERROR!

A. DUB ERROR!

<CANNOT DUB

ON A LP RECORDED TAPE>

<CANNOT DUB

ON A 16BIT

RECORDING>

<CHECK TAPE’S ERASE

PROTECTION TAB>

EN 85

Function

Displays the battery remaining power. Remaining power level: high

Remaining power level: exhausted

As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded.( pg. 12)

Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “ AUTO ” or “ MANUAL ” and the VIDEO/MEMORY Switch (GR-

DVL720/DVL520 only) is set to “VIDEO”.

( pg. 12)

Appears if dirt is detected on the heads during recording or playback.

Use an optional cleaning cassette.

( pg. 76)

Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.

Appears if a tape is not loaded when the Recording Start/Stop Button or

SNAPSHOT Button is pressed while the Power Switch is set to “

AUTO

” or

 

“MANUAL ” and the VIDEO/MEMORY Switch (GR-DVL720/DVL520 only) is set to “VIDEO”.

Appears when the tape ends during recording or playback.

( pg. 67)

Appears if a tape in another format is loaded when the VIDEO/MEMORY Switch (GR-DVL720/DVL520 only) is set to “VIDEO”.

● Appears when the date/time is not set.

( pg. 11)

●Appears when the built-in clock battery runs out and the previously set date/time is erased. Consult your nearest JVC dealer for replacement.

Appears for 5 seconds after power is turned on if the lens cap is attached.

Appears if Audio Dubbing is attempted on a blank portion of a tape.

( pg. 63)

●Appears if Audio Dubbing is attempted on a tape recorded in the LP mode. ( pg. 63)

●Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio. ( pg. 63)

●Appears if A. DUB (e) on the remote control is pressed when the erase

protection tab is set to “SAVE”.

( pg. 63)

CONTINUED ON NEXT PAGE