JVC GR-DVL512 specifications EN27, To Delete Unwanted Still Images, To Remove The Shutter Sound

PIN-UP

Pin-Up mode*

FRAME Snapshot mode with frame*

FULL Snapshot mode with no frame*

MULTI-4

Multi-Analyzer 4

MULTI-9

Multi-Analyzer 9

*There is the sound effect of a shutter closing.

EN27

To Delete Unwanted Still Images . . .

.... when unwanted still images are stored in the memory

card or its memory is full, refer to “Deleting Images” ( pg. 32) and delete unwanted still images.

To Remove The Shutter Sound . . .

.... when you do not want to hear the shutter sound, set

“BEEP” to “OFF” in the Menu Screen ( pg. 46, 48). The sound is no longer heard from the speaker.

NOTES:

●Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot

recording will be performed in the FULL mode during Digital Zoom or Night-Alive (  pg. 38).

●Even if “DIS” is set to “ON” ( pg. 47), the Stabilizer will be disabled.

●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●If Program AE with special effects (  pg. 38) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●If shooting is not performed for approx. 5 minutes when the Power Switch is set to “ ” or “ ” and power is supplied from the battery pack, the camcorder shuts off automatically to save power. To perform shooting again, set the Power Switch to “OFF”, then to “ ” or “ ”.

●The Motor Drive mode ( pg. 42) is disabled when the VIDEO/DSC Switch is set to “ ”.

●Still images taken are compliant to DCF (Design rules for Camera File systems). They do not have any compatibil- ity with devices which are not compliant to DCF.