
SNAPSHOT Button
EN55
Dubbing Images Recorded On A Tape To A Memory Card
Lock Button
Power Switch
Display
Menu Screen
COPY – OF F
ON
SP | 6 |
Play/Pause Button (4/6)
MENU/ |
BRIGHT Wheel |
Images can be dubbed from a tape to a memory card .
1 Load a memory card ( pg. 14) and cassette ( pg. 12).
2
3 Set the VIDEO/DSC Switch to “VIDEO”, then set the
Power Switch to “ ” while pressing down the Lock Button.
4 Press the MENU/BRIGHT wheel in. The Menu Screen appears. Rotate it to select “ VIDEO” and press it. The VIDEO Menu appears.
5 Rotate the MENU/BRIGHT wheel to select
“ COPY” and press it. The Sub Menu appears. Rotate it to select “ON” and press it. Selection is complete.
6 Rotate the MENU/BRIGHT wheel to select “1RETURN” and press it twice. The normal playback screen resumes.
7 To select a video image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.
8 To start dubbing, press SNAPSHOT. The selected image is stored in the memory card.
•“” blinks during dubbing.
NOTES:
●If SNAPSHOT is pressed in step 8 when a memory card is not loaded, the message “COPYING FAILED” is displayed.
●If an image recorded on the tape using the WIDE mode ( pg. 48) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.
●To use Playback Special Effects with a video image you
wish to dub, perform up to step 8 using the remote control ( pg. 59).
VIDEO/DSC Switch (Open the LCD monitor to access this switch.)