MENU/BRIGHT Wheel
EN35
TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS
|
| Display |
|
| |
NEXT |
| <D P O F > | VGA |
| |
|
| ||||
1 9 | 0 0 | 2 0 | 0 0 | 2 1 |
|
2 2 | 0 0 | 2 3 | 0 0 | 2 4 | 0 0 |
|
|
| DPOF |
|
|
|
|
| |
|
| SELECT | – | CANCEL |
|
|
|
| EXECUTE |
|
|
|
|
|
|
|
|
|
|
DPOF Screen
Confirmation Screen
1 Perform steps 1 through 3 on pg. 34.
2 Rotate the MENU/BRIGHT wheel to selsect “SELECT” and press it. Selection is complete. The DPOF Screen appears.
3 Rotate the MENU/BRIGHT wheel to move the green frame to the image you wish to print and press it.
4 Select the number of prints by rotating the MENU/ BRIGHT wheel towards “+” to increase the number, or towards
•The number of prints can be set up to 15.
•To correct the number of prints, select the image again and change the number.
5 Rotate the MENU/BRIGHT wheel upward to select “NEXT” and press it. Selection is complete. The Confirmation Screen appears.
6 Rotate the MENU/BRIGHT wheel to select “EXECUTE” and press it. The normal playback screen appears.
•To cancel selection, rotate the MENU/BRIGHT wheel to select “CANCEL” and press it.
To Reset The No. Of Prints . . .
.... select “RESET” in step 4 on pg. 34. The number of
prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this may cause the memory to be corrupted.
NOTES:
●If you load a memory card already set as shown above in a printer compatible with DPOF, it will make prints of the selected still images automatically.
●To print images recorded on a tape, first dub them to a memory card ( pg. 55).
