6 EN
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
Available when the Power Switch is set to “ ” or “ 
” and no cassette is in the camcorder.
Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.
“DEMO MODE” remains “ON” even if the camcorder power is turned off.
To cancel Automatic Demonstration:
1.Set the Power Switch to “ 
” while pressing down the Lock Button located on the switch and press the MENU/ BRIGHT wheel in. The Menu Screen appears.
2.Rotate the MENU/BRIGHT wheel to select “ 
SYSTEM” and press it. The SYSTEM Menu appears.
3.Rotate the MENU/BRIGHT wheel to select “DEMO MODE” and press it. The Sub Menu appears.
4.Rotate the MENU/BRIGHT wheel to select “OFF” and press it.
5.Rotate the MENU/BRIGHT wheel to select “1RETURN”, and press it twice. The normal screen appears.
MENU/BRIGHT Wheel
Lock Button
Power Switch
Sub Menu
DEMO MODE – OFF
ON
NOTE:
If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.
How To Attach The Lens Cap
To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.
NOTE:
To confirm the lens cap is on correctly make sure the cap is flush to the camera.
1 | 2 | 3 |
