42 EN, Snapshot For Video Recording | JVC GR-DVL512 specification

42 EN

SNAPSHOT Button

FOR RECORDING (cont.)

Snapshot (For Video Recording)

This feature lets you record still images that look like photographs onto a tape.

SNAPSHOT MODE SELECTION

1 Set the VIDEO/DSC Switch to “VIDEO”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch.

Lock Button

Power Switch

2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.

3 Rotate the MENU/BRIGHT wheel to select “ CAMERA”. Press it and the CAMERA Menu appears.

4 Rotate the MENU/BRIGHT wheel to select “SNAP MODE”, then press it.

5 Rotate the MENU/BRIGHT wheel to select the desired Snapshot mode, then press it.

Rotate the MENU/BRIGHT wheel to select

“1RETURN” and press it twice. The Menu Screen closes.

•The available Snapshot modes are the same as those on pg. 27.

VIDEO/DSC Switch (Open the LCD monitor to access this switch.)

Display

Menu Screen

SNAP MODE – P I N–UP

FRAME

FUL L

MUL T I – 4

MUL T I – 9

NOTES:

SNAPSHOT RECORDING

1 Press SNAPSHOT.

If you press during Record-Standby . . .

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the camcorder re-enters the Record-Standby mode.

If you press during Recording . . .

..... “PHOTO” appears and a still image will be recorded

for approx. 6 seconds, then the normal recording resumes.

•Regardless of the Power Switch position (“ ” or “ ”), Snapshot recording takes place using the selected Snapshot mode.

Motor Drive Mode

Keeping SNAPSHOT pressed provides an effect similar to serial photography. (Interval between still images: approx. 1 second)

●To remove the shutter sound, “BEEP” on pg. 46, 48.

●Even if “MULTI-4” or “MULTI-9” is engaged, Snapshot recording will be performed in the FULL mode during Digital Zoom or Night-Alive ( pg. 38).

●If Snapshot recording is not possible, “PHOTO” blinks when SNAPSHOT is pressed.

●If Program AE with special effects ( pg. 38) is engaged, certain modes of Program AE with special effects are disabled during Snapshot recording. In such a case, the icon blinks.

●If SNAPSHOT is pressed when “DIS” is set to “ON” ( pg. 47), the Stabilizer will be disabled.

●The Motor Drive mode is disabled when “REC SELECT” is set to “ / ” in the Menu Screen ( pg. 49).

●During tape playback as well, all snapshot modes are available when “ COPY” is set to “OFF” in the Menu Screen ( pg. 50). However, the shutter sound is not heard.