18 EN

TAPE RECORDING (cont.)

Zoom in (T: Telephoto)

1 x WT

10 x WT

20x WT

40x W T

Zoom out (W: Wide angle)

Zoom display

10 x WT

Digital zoom zone

10X (optical) zoom zone

Approximate zoom ratio

Power Zoom Lever

FEATURE: Zooming

PURPOSE:

To produce the zoom in/out effect, or an instanta- neous change in image magnification.

OPERATION:

Zoom In

Slide the Power Zoom Lever towards “T”.

Zoom Out

Slide the Power Zoom Lever towards “W”.

The further you slide the Power Zoom Lever, the quicker the zoom action.

NOTES:

Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standby,

lock the focus by using the manual focus

( pg. 43), then zoom in or out in Record mode.

Zooming is possible to a maximum of 700X, or it

can be switched to 10X magnification using the optical zoom ( pg. 47).

Zoom magnification of over 10X is done through Digital image processing, and is therefore called Digital Zoom.

During Digital zoom, the quality of image may suffer.

Digital zoom cannot be used when the VIDEO/ MEMORY Switch is set to “MEMORY” ( pg. 17).

Macro shooting (as close as approx. 5 cm (2") to the subject) is possible when the Power Zoom Lever is set all the way to “W”. Also see “TELE MACRO” in the Menu Screen on page 48.

Page 18
Image 18
JVC GR-DVL920 specifications 18 EN, Slide the Power Zoom Lever towards T, Zoom Out