38 EN | FOR RECORDING | |||
NOTES: |
|
|
| |
● During | Makes dark subjects or areas even brighter than they | |||
cannot be activated and its indicator blinks or goes out: | ||||
• Some modes of “Program AE With Special Effects” | would be under good natural lighting. Although the | |||
( pg. 38, 39). | recorded image is not grainy, it may look as if it is | |||
• “GAIN UP” in the CAMERA Menu ( pg. 47). | strobing due to the slow shutter speed. | |||
• “DIS” in the MANUAL Menu ( pg. 47). | 1 Set the Power Switch to “ | MANUAL | ” while pressing | |
• “Video light” when LIGHT OFF/AUTO/ON is set to | ||||
| ||||
“AUTO” ( pg. 19). | down the Lock Button located on the switch. | |||
● During | 2 Press NIGHT so that the | |||
camcorder into focus. To prevent this, use of manual | ||||
focus and/or a tripod is recommended. | “ ”appears. |
|
| |
• The shutter speed is automatically adjusted to provide up to 30 times sensitivity.
• “A” appears beside “ 
” while the shutter speed is being automatically adjusted.
To Deactivate Night-Alive . . .
MENU/BRIGHT Wheel | ..... press NIGHT again so that the | |
indicator disappears. | ||
|
Lock Button
Power Switch
NIGHT Button
Program AE With Special Effects
1 Set the Power Switch to “ | MANUAL | ” while pressing |
|
|
down the Lock Button located on the switch.
2 Press the MENU/BRIGHT wheel in. The Menu Screen appears.
3 Rotate the MENU/BRIGHT wheel to select “ 
PROGRAM AE”, then press it.
4 Rotate the MENU/BRIGHT wheel to select the desired mode ( pg. 39), then press it. Selection is complete. Press the MENU/BRIGHT wheel in again. The Menu Screen closes.
•The PROGRAM AE Menu disappears and the selected mode is activated. The selected mode indicator appears.
Display
SHUT TER1/100
SPORTS SNOW SPOT L I GHT TW I L I GHT SEP I A MONOTONE CLASS I C F I LM STROBE
To Deactivate The Selected Mode . . .
..... select “OFF” in step 4.
NOTES:
●Program AE with special effects can be changed during recording or during
●Some modes of Program AE special effects cannot be used during
IMPORTANT
Some modes of Program AE with special effects cannot be used with certain Fade/Wipe Effects ( pg. 40, 41). If an unusable mode is selected, its indicator blinks or goes out.
