JVC GR-DVL920 With the camcorder’s Power Switch, Switch set to the camera Set to Play Position

	642531						^$@0%#!		EN 55
	8	7					*	&
		9					)	(
							Functions
1	Buttons		With the camcorder’s Power				With the camcorder’s Power Switch
			Switch set to the camera				set to “PLAY”.
			position (“	AUTO	” or “	MANUAL	”).
2Infrared beam transmitting window			Transmits the beam signal.
3Zoom (T/W) Buttons			Zoom in/out ( pg. 18)				Zoom in/out ( pg. 57)
4DISPLAY Button				—			pg. 23, 52, 59
5SHIFT Button				—			pg. 57, 58
	SLOW Rewind/Forward Buttons			—			pg. 56
6Left/Right Buttons				—			pg. 57
7REW Button				—			• Rewind/Reverse Shuttle Search on the
							tape ( pg. 21)
							• Displays previous page/file on the
							memory card ( pg. 28)
8FADE/WIPE Button				—			pg. 60
9EFFECT ON/OFF Button				—			pg. 56
0EFFECT Button				—			pg. 56
!PAUSE IN Connector				—			pg. 59
@START/STOP Button			Functions the same as the Recording Start/Stop Button on the camcorder.
#MBR SET Button				—			pg. 58
$SNAPSHOT Button			Functions the same as SNAPSHOT on the camcorder.
	Up Button			—			pg. 57
%INSERT Button				—			pg. 64
	Down Button			—			pg. 57
^A. DUB Button				—			pg. 63
&PLAY Button				—			• Starts Playback of the tape ( pg. 21)
							• Starts Auto Playback of the memory
							card ( pg. 28)
*FF Button				—			• Forward/Forward Shuttle Search on
							the tape ( pg. 21)
							• Displays next page/file on the memory
							card ( pg. 28)
(STOP Button				—			• Stops the tape ( pg. 21)
							• Stops Auto Playback ( pg. 28)
)PAUSE Button				—			Pauses the tape ( pg. 56)
	R.A.EDIT Buttons			—			pg. 58 – 62