JVC GR-DVM5 Tape Remaining Indicator, Brightness Control, LCD Monitor/Viewfinder Indications

22ENRECORDING

BasicRecording(Cont.)

Tape Remaining Indicator

The time remaining on the tape is automatically monitored and displayed (☞ pg. 79). When the tape ends, “TAPE END” appears. If the indications are turned off, the tape remaining indicator appears when remaining time reaches 2 minutes.

Display

90 min

REC

89 min 3 min 2 min

blinking

0 min 1 min

blinking blinking

BRIGHT – – – – –6– – – – –

IND. ON/OFF button

Select Dial

Brightness Control

You can adjust the brightness of the display by rotating the Select Dial.

LCD Monitor/Viewfinder Indications

You can make the LCD monitor/Viewfinder indications appear/disappear.

1 ADJUST BRIGHTNESS

Rotate the Select Dial until the brightness indicator moves and the display reaches its appropriate brightness.

•The brightness indication appears on the display.

1 PRESS IND.ON/OFF BUTTON When you do not want the indications to appear, press the IND.ON/OFF button for longer than approximately 1 second. Certain indications disappear.

Press again for longer than approx. 1 second to make the indicaitons reappear.

NOTE:

It is impossible to make the tape running indicator and warnings etc. disappear from the LCD monitor or the viewfinder. For the indications that can be removed, ☞ pg. 79.