Turn on Power, Select TV’S Video Mode

VCR/TV Connection (when connecting directly to the camcorder)

Please refer to your VCR and/or TV instruction manual(s) when connecting.

1 CONFIRM POWER-OFF STATUS Make sure the camcorder’s power is off.

2 CONNECT CAMCORDER TO TV OR VCR Pull out the connector cover and open it. Connect as shown in the illustration above.

If Using A VCR . . . go to step 3.

If not . . . go to step 4.

3 CONNECT VCR OUTPUT TO TV INPUT Refer to your VCR’s instruction manual.

Turn the Power Dial to “PLAY” while pressing down the lock button located on the dial and turn on the TV/VCR.

Set the TV to the channel or mode appropriate for video playback.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time, Time Code

.... set to “ON” or “OFF” in the Playback Menu

(☞ pg. 52).

• Playback Sound Mode Display

.... set the Power Dial to “	M	”, press the MENU
	M

button, and set “ON SCREEN” in the Date/ Time Menu (☞ pg. 11) to “ON” or “OFF”. Then set the Power Dial back to “PLAY”.

NOTES:

●It is recommended to use the AC Charger Station

●Never connect any other VIDEO/AUDIO cable than the provided VIDEO/AUDIO cable to the camcorder’s AV OUT connector.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●To keep the camcorder's display from appearing on the TV screen during playback, press the IND. ON/OFF button for longer than 1 second.

●While the VIDEO/AUDIO cable is connected to the AV OUT connector, sound cannot be heard from the speaker.