FORRECORDINGEN45

Night-Alive

NIGHT-ALIVE Button

Power Switch

Lock Button

F

 

LP

A

FO Y

 

Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy, it may look as if it is strobing due to the slow shutter speed.

1 Set the Power Switch to “” while pressing down the Lock Button located on the Switch. Open the LCD monitor fully or pull out the viewfinder fully.

2 Press NIGHT-ALIVEso that the Night-Alive indicator “ ” appears.

•The shutter speed is automatically adjusted to provide up to 30 times sensitivity.

•“” appears beside “” while the shutter speed is being automatically adjusted.To Deactivate Night-Alive . . .... press NIGHT-ALIVEagain so that the Night-Alive indicator disappears.

NOTES:

cDuring Night-Alive, the following functions or settings cannot be activated and its indicator blinks or goes out:

Some modes of “Program AE With Special Effects” (Z pg. 46, 47) and “Picture Wipe/Dissolve” (Z pg. 48, 49).

“Snapshot Flash” (Z pg. 54).“GAIN UP” in CAMERA MENU (Z pg. 39).“DIS” in MANUAL MENU (Z pg. 39).

cDuring Night-Alive, it may be difficult to bring the camcorder into focus. To prevent this, use of a tripod is recommended.