Load a memory card (Z pg. 14) and cassette (Z pg. 12).

60ENDUBBING(cont.)

Dubbing Still Images Recorded On A Tape

To A Memory Card (GR-DVM75 only)

Play/Pause Button (4/6)

VIDEO/DSC Switch

Power Switch

Lock Button

 

F

 

F

Y

O

 

A

 

L

P

SNAPSHOT

Button

MENU Wheel

Display

VIDEO Menu

COPY – OF F

ON

SP 6

Still images can be dubbed from a tape to a memory card.

1

2 Select the Snapshot mode in the Menu Screen (Z pg. 26) to use for dubbing the image to the memory card.

3 Set the VIDEO/DSC Switch to “VIDEO”, then set the

Power Switch to “ ” while pressing down the Lock Button located on the switch.

4 Press the MENU Wheel in. The Menu Screen appears. Rotate it to select “ VIDEO” and press it. The VIDEO Menu appears.

5 Rotate the MENU Wheel to select “ COPY” and press it. The Sub Menu appears. Rotate it to select “ON” and press it. Selection is complete.

6 Rotate the MENU Wheel to select “RETURN” and press it twice. The normal playback screen resumes.

7 To select a still image to be dubbed, start playback by pressing 4/6. At the moment you find the image you wish to dub, press it again to engage Still Playback.

8 To start dubbing, press SNAPSHOT. The selected image is stored in the memory card.

•“” blinks during dubbing.

NOTES:

cIf SNAPSHOT is pressed in step 8 when a memory card is not loaded, the message “COPYING FAILED” is displayed.

cIf an image recorded on the tape using the WIDE mode (Z pg. 40) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.

cTo use Playback Special Effects with a video image you wish to dub, perform up to step 8 using the remote control (provided) (Z pg. 65).

cImages are dubbed in VGA file size.