Program
|
|
|
|
|
| Random |
|
| I N | OUT MODE | |||
1 – – | – | ~ |
|
| Assemble Editing | |
2 |
|
| ~ |
|
| Menu |
3 |
|
| ~ |
|
| |
4 |
|
| ~ |
|
|
|
5 |
|
| ~ |
|
|
|
6 |
|
| ~ |
|
|
|
7 |
|
| ~ |
|
|
|
8 |
|
| ~ |
|
|
|
| T I ME | CODE | – |
|
|
|
| TOTAL | 0 0 : 00 |
|
|
|
EN71
SELECT SCENES
4 Point the remote control at the camcorder’s remote sensor. Press PLAY (4) and then press R.A.EDIT ON/ OFF on the remote control.
The Random Assemble Editing Menu appears.
5 If using a Fade/Wipe at the beginning of the scene, press FADE/WIPE on the remote control.
•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.
•You cannot use a Picture Wipe/Dissolve at the beginning of Program 1.
6 At the beginning of the scene, press EDIT IN/OUT on the remote control. The
7 At the end of the scene, press EDIT IN/OUT. The
Remote sensor
FADE/WIPE
PLAY
8 If using a Fade/Wipe at the end of the scene, press FADE/WIPE.
•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.
•If you select a Fade/Wipe effect for an
•You cannot use a Picture Wipe/Dissolve at the end of the last scene.
•When you use Fade/Wipe effects, that time is included in the total time (this does not apply to Picture Wipe/Dissolve).
9 If using Playback Special Effects, press EFFECT (Z pg. 65).
10 Repeat steps 6 through 9 to register additional scenes.
EFFECT
EDIT IN/OUTR.A.EDIT ON/OFF
CANCEL
•To change previously registered points, press CANCEL on the remote control. The registered points disappear, one at a time, from the most recently registered point.
•If you are not using Fade/Wipe or Program AE with special effects, repeat steps 6 and 7 only.
NOTES:
cWhen choosing a scene, set
cIf the search time for an
cIf there are blank portions before or after the
cSince time codes register time only as accurately as seconds, the time code total time may not match the total program time exactly.
cTurning off the camcorder’s power erases all registered
cIf you select Sepia or Monotone mode from Program AE with special effects, you cannot use the Dissolve or Black & White Fader. In this case the Dissolve or Black & White indicator begins blinking. Once the next
cIt is not possible to use Fade/Wipe effects and Program AE with special effects during Random Assemble Editing using a DV cable.
CONTINUED ON NEXT PAGE