Set “AV/S-VIDEO” to “OUT” in the Menu Screen ( pg. 35).

42 EN

POWER Switch

Lock Button

 

To S

Red to

Yellow to

AUDIO R

VIDEO*

White to

Core filter

AUDIO L

 

Audio/Video cable

S-Video

cable

[RCA plug to RCA plug]

(provided)

(provided)

 

 

To AUDIO,

 

VIDEO* and

 

S-VIDEO IN

 

connectors

VCR

TV

*Connect when the S-Video cable is not used.

DUBBINGDubbing To A VCR[To use this camcorder as a player]

1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 38 and 39.

2 Set the camcorder’s POWER Switch to “” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3

4 Engage the VCR’s AUX and Record-Pause modes.

5 Engage the camcorder’s Play mode to find a spot just before the edit-in point. Once it is reached, press 4/6 on the camcorder.

6 Press 4/6 on the camcorder and engage the VCR’s Record mode.7 Engage the VCR’s Record-Pause mode and press 4/6 on the camcorder.

8 Repeat steps 5 through 7 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

●When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.

●You can use the AV OUT connector on the camcorder for connection.

●You can use Playback Zoom ( pg. 48) or Playback Special Effects ( pg. 49) in step 5.

●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in theMenu Screen ( pg. 35).

•Time Code

.... set “TIME CODE” to “ON” or “OFF” in the MenuScreen ( pg. 35).•Playback Sound Mode, Tape Speed And Tape Running Displays

.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen ( pg. 35). Or, press DISPLAY on the remote control.