EN5

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO. MODE” is set to “ON” (factory-preset).

Available when the POWER Switch is set to “ ” and no cassette is in the camcorder.

Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.

“DEMO. MODE” remains “ON” even if the camcorder power is turned off.

To cancel Automatic Demonstration, set the Operation Switch

to “” and set the POWER Switch to “ ” while pressing down the Lock Button located on the switch, then press the MENU wheel twice while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not have to go through the Menu Screen). Rotate the MENU wheel to select “OFF” and press it. The normal screen appears.

MENU Wheel

CAMERA MENU

1RETURN

REC MODE

SOUND MODE

ZOOM SNAP MODE

GA I N UP BEEP / TAL LY I D NUMBER DEMO. MODE ON

OF F