
8 EN
Power Zoom Lever
START/STOP Button
Lock Button
POWER Switch
MODE Dial
PAUSE
Dioptre Adjustment Control
GETTING STARTED (cont.)Grip Adjustment1 Separate the Velcro strip.2 Pass your right hand through the loop and grasp the grip.
3 Adjust so that your thumb and fingers can easily operate the START/STOP Button and Power Zoom Lever. Refasten the Velcro strip.
Viewfinder Adjustment1 Set the POWER Switch to “ ” while pressing down the Lock Button located on the switch and set the MODE Dial to any position.
3 Turn the Dioptre Adjustment Control until the indications in the viewfinder are clearly focused.
Tripod Mounting1 Align the screw on the tripod with the camera’s mounting socket. Then tighten the screw.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilise the camcorder. To prevent damage to the unit caused by falling over, do not use a small- sized tripod.