
6
EN

























QUICK
OPERATION
GUIDE

(VIDEO)

The image you shoot is recorded onto a video tape.
SUPPLY POWER
AHook on.
B Push in.
BATTERY RELEASE
Using the battery pack
Hook its end to the camcorder ( ) and push the battery pack in until it locks in place (
). (Charging procedure, ☞ pg. 8)
To remove the battery pack
Slide BATTERY RELEASE and pull out the battery pack.
INSERTING A VIDEO
CASSETTE
4 PUSH Button
3
1 2
EJECT Switch
1Open the LCD monitor to an angle of over 60 degrees.
2Slide EJECT to open the cassette holder.
3 Insert a video cassette.
4 Press PUSH to close the cassette holder. (For more details, ☞ pg. 13)
PLAYBACK
3REW (2) Button
SHOOTING
1
LENS COVER
Open/Close Ring
3
Set to “AUTO” or “PRO.”
4PLAY/PAUSE (4/6) Button
STOP (5) Button
2 Set to “PLAY”
4Recording Start/Stop Button
1 Set to “VIDEO”
1Set the System Select Switch to “VIDEO”.
2 Set the Power Switch to “PLAY”.
3 Press REW (2).
—The tape will automatically stop at the beginning of the tape.
4Press PLAY/PAUSE (4/6).
—Playback starts and the playback picture appears.
•To stop playback, press STOP (5). (For more details, ☞ pg. 44.)
•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.
Or simply play back the tape on a VHS VCR using the Cassette Adapter. ☞ pg. 47
2Set to “VIDEO”
1 Turn the LENS COVER Open/Close Ring to open the lens cover.
2Set the System Select Switch to “VIDEO”.
3 Set the Power Switch to “AUTO” or “PRO.”.
—The power lamp will light and an image will appear.
4Press the Recording Start/Stop Button.
— Recording starts.
•To stop recording temporarily, momentarily press the Recording Start/Stop Button once again.
(For more details, ☞ pgs. 16 – 19)
•The viewfinder switches off automatically to save power when the LCD monitor is opened at an angle of over 60 degrees.
•The LCD monitor turns on/off when it is opened/closed at approx. 60 degrees.