34
EN
RECORDING
Advanced
Features
(cont.)
Using Menu For Detailed Adjustment
System Select Switch
Select Dial
MENU Button
This camcorder is equipped with an
1 SELECT OPERATION SYSTEM AND MODE The operation system depends on the function you wish to select.
Set the System Select Switch to “VIDEO” or “D.S.C.” according to each function's “*/**” explanation described at the bottom of pages 35 and 36, and set the Power Switch to “PRO.”.
Display
(ex. Menu Screen available using the MENU Button)
4NEXT
M. W. B. AUTO
D . ZOOM ON TELE MACRO OFF DATE
TIME TAPE LENGTH T45
PICTURE FINE
SNAPSHOT FULL
4RETURN
Menu Screen 1
2 ACCESS MENU SCREEN
Menu access depends on the function you select.
If you select the functions from the “Menu Screen Available Using The Select Dial” described on pg. 35 . . .
.... press the Select Dial. The Menu Screen appears.
If you select the functions from the “Menu Screen Available Using The MENU Button” described on pg. 35 and 36 . . .
.... press MENU. The Menu Screen appears.
3 SELECT FUNCTION
Rotate the Select Dial to place the highlight bar on the desired function.
4BACK
REC. TIME OFF
INT. TIME OFF TALLY LAMP ON JLIP ID NO 06 DEMO MODE OFF
4RETURN
REC TIME
OFF 1
4S 1
2S
1S
5S
EXIT
4BACK
REC. TIME 1S
INT. TIME OFF TALLY LAMP ON JLIP ID NO 06 DEMO MODE OFF
Menu Screen 2
Setting Menu (ex. REC TIME)
•To go from Menu Screen 1 to Menu Screen 2, rotate the Select Dial to “NEXT” and press it. To go back to Menu Screen 1 from Menu Screen 2, rotate the Select Dial to “BACK”, and press it.
•If the setting you want cannot be found in the Menu Screen, place the highlight bar on “RETURN”, then go to step 6.
4 MAKE SETTING
Press the Select Dial. The setting procedure depends on the function you select.
If you select “FOCUS”, “EXPOSURE”, “TITLE”, “DATE/ TIME DISP.”, “DATE/ TIME”, “PICTURE” or "SNAP- SHOT". . .
.... see respective pages (FOCUS: ☞ pg. 38, 39,
EXPOSURE: ☞ pg. 37, TITLE: ☞ pg. 33,
DATE/TIME DISP.: ☞ pg. 32, DATE/TIME: ☞ pg. 11,
PICTURE: ☞ pg. 22, SNAPSHOT: ☞ pg. 20, 25).
If you select “WIDE”, “D.ZOOM”, “TELE MACRO” or “DEMO MODE” . . .
.... the selected function’s parameter starts blinking.
Rotate the Select Dial until the desired parameter appears. Go to step 5.
If you select “JLIP ID NO.” . . .
.... press the Select Dial so that the number blinks, then
4RETURN
Normal Screen
NOTE:
No menu functions except “FOCUS” and “EXPOSURE” are available while in the Record mode.
rotate it until the desired number appears, and press it. Then rotate the Select Dial to move the highlight bar to “EXIT”.
If you select any other functions . . .
.... rotate the Select Dial to move the highlight bar to the
desired setting.
•If you decide you want to return to the previous setting, rotate the Select Dial to move the highlight bar to “EXIT”.
5 END SETTING
Press the Select Dial. The Menu Screen reappears with the highlight bar on “RETURN”.
6 CLOSE MENU SCREEN
Press the Select Dial. The normal screen reappears.
