EN 55
Master Page: Right
Still images can be dubbed from a tape to a memory
card.
1Load a cassette. (pg.16)
2Load a memory card. (pg. 17)
3Set the Playback Mode Switch to “VIDEO”.
4Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
5Set “ COPY” to “ON”. (pg.33, 39)
6Press 4·9 to start playback.
7At the point you want to dub, press 4·9 again to
engage Still Playback.
8To dub the image, press SNAPSHOT.
The “ ” indication appears during
dubbing.
The selected image is stored in the memory
card.
NOTES:
If SNAPSHOT is pressed in step8 when a memory
card is not loaded, the message “COPYING
FAILED” is displayed.
If an image recorded on the tape using “DV
WIDE” (pg.36) is dubbed to a memory card,
the WIDE mode identifying signal is not dubbed
with it.
To use Playback Special effects with a video image
you wish to dub, perform up to step8 using the
remote control (provided). (pg.58)
Images are dubbed in the following image sizes:
Scenes recorded in HI-RES mode: 848x 480
pixels
Scenes recorded in PS50 mode: 848x 480 pixels
(16:9)/640x 480 pixels (4:3)
Scenes recorded in DV mode: 640x 480 pixels
Dubbing Still Images Recorded On A Tape To A Memory Card
Power Switc h
SNAPSHOT Button
Lock Button
MENU Wheel
Play/Pause Button (4·9)
Playback Mode Switch
ADVANCED FEATURES
GR-PD1PAL_07Advanced.fm Page 55 Thursday, July 17, 2003 10:00 AM