JVC LYT1193-001A Be corrupted if the battery becomes exhausted, Corrupted, initialise it, Appears

NAV I GAT I ON

DELETE CURRENT?

						EN 51
To add thumbnail images during video						be corrupted if the battery becomes exhausted
playback						during deletion. If the memory card becomes
						corrupted, initialise it.
1	Perform steps 1 to 4 in “To find scenes on tape					NOTE:
2	using thumbnail images (NAVIGATION Search)”.					Once images are deleted, they cannot be restored.
	Press 4·9 to start video playback.					Check images before deleting.
3	Press NAVI STORE at the desired point.					IMPORTANT:
	● The “ ” indicator appears briefly and the					● Be sure to always use the same tape and memory
	image of the point where NAVI STORE is					card together as they were during recording;
	pressed is stored in the memory card as a					otherwise, the camcorder cannot recognise Tape
	thumbnail image.					and Memory Card IDs to perform NAVIGATION
	● If you use the tape recorded in PS50 or HI-RES					function properly.
	mode, it will enter the playback pause mode.					● Check if an appropriate tape and memory card are
	To play, press 4·9.					loaded when the following messages appear: “NO
						ID ON TAPE OR CARD”, “UNABLE TO USE
To delete thumbnail images						NAVIGATION”, “THIS MEMORY CARD IS NOT
						COMPATIBLE”.
1	Load a memory card. ( pg. 17)					● If you change the memory card while shooting on
2	Set the Playback Mode switch to “VIDEO”.					one tape, two memory cards will share the tape’s
						thumbnail images. We recommend that you use
3	Set the Power Switch to “P” while pressing					one memory card for one tape.
4	down the Lock Button located on the switch.					● NAVIGATION Search does not work if the current
	Press the MENU Wheel in. The Menu Screen					position is at a blank portion on the tape. Also, do
	appears.					not leave a blank portion partway through the tape
						when shooting; otherwise, NAVIGATION function
5 Rotate the MENU Wheel to select “t VIDEO”,
						does not work properly.
6	and press it. The VIDEO Menu appears.					● Before shooting newly over a recorded tape, be
	Rotate the MENU Wheel to					sure to delete all thumbnail images of the previous
			V I DEO
	select “NAVI.DEL.”, and	SOUND MODE –			STEREO	recording from the relevant memory card.
		DV NARR .		–	OFF
	press it. The Sub Menu	SYNCHRO		–	± 0. 0	● If you copy thumbnail images from one memory
		REC MODE		–
	appears.		COPY –		OFF	card to another via a PC, NAVIGATION Search
		NAV I . DEL .		–	OFF
7	By rotating the MENU	S / AV I NPUT				does not work with the copied memory card.

Wheel...RETURN

Select “IMAGE SEL.” to delete the currently displayed thumbnail image.

Select “TAPE SEL.” to delete all thumbnail images for the tape which contains the currently displayed image.

Select “ALL” to delete all thumbnail images stored in the memory card at once.

8 Press the MENU Wheel in. The NAVIGATION screen appears.

9 Rotate the MENU Wheel to	2 6 .12 . 0 3 1 5 : 0 0
select “EXECUTE”, and	EXECUTE
	RETURN
press it.

●Press 3 to display the previous page. Press 5 to display the next page.

●To cancel deletion, select “RETURN”.

●Thumbnail images cannot be deleted during video playback.

CAUTION:

Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Power Adapter/Charger, as the memory card may

ADVANCED FEATURES