JVC GR-SXM62ED, GR-SX52ED, GR-SX51A Feature Quick Review, To check the end of the last recording

5 SEC. REC Button (GR-SXM71A/SXM61A/SXM75ED/ SXM72ED/SXM62ED only)

RETAKE (2/3)

Button

Display

PAUSE

5 S

5 Sec. Rec mode indicator (GR-SXM71A/SXM61A/SXM75ED/ SXM72ED/SXM62ED only)

EN19

FEATURE: Quick Review

PURPOSE:

To check the end of the last recording.

OPERATION:

1)Set the Power Switch to “CAMERA” (“AUTO” or “PRO.”).

2)Press 2and release quickly during the Record– Standby mode.

Tape is rewound for approx. 1 second and played back automatically, then pauses in Record–Standby mode for the next shot.

NOTE:

Distortion may occur at the start of playback. This is normal.

FEATURE: Retake

PURPOSE:

To re-record certain segments.

OPERATION:

1)Make sure the camcorder is in the Record–Standby mode.

2)Press and hold either RETAKE to reach the start point for new recording. Pressing 3forwards the tape and pressing 2reverses it.

3)Press the Recording Start/Stop Button to start recording.

NOTE:

Noise bars appear and pictures may become monochrome or darken during Retake. This is normal.

FEATURE: 5Sec. Rec (5-sec. Recording) (GR-SXM71A/SXM61A/ SXM75ED/SXM72ED/ SXM62ED only)

PURPOSE:

To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programmes.

OPERATION:

Make sure the recording mode is set to “SP”.

1)During Record–Standby, press 5SEC. REC. “ 5S” appears and 5Sec. Rec is reserved.

2)Press the Recording Start/Stop Button. Recording starts, and after 5-second recording is finished, the camcorder reenters the Record–Standby mode automatically.

To cancel the 5Sec. Rec function, press 5SEC. REC again so that “ 5S” disappears.

NOTE:

Fade/Wipe (
pg. 22) cannot be activated by pressing 5SEC. REC.