JVC GR-SX51A, GR-SX52ED Make Connections, Connect the editing cable to the Remote Pause terminal

		Open the
Open the cover.		cover.
To J	To Video	To S-Video
terminal	output and	output
(JLIP)	Audio	connector
	output
	connectors
	Audio/Video	S-Video cable
	(A/V) cable
		(provided)
	(provided)
Editing cable*
		To AUDIO
		(L/MONO),
		VIDEO and
		S-VIDEO IN
		connectors

To Remote

PAUSE

VCR

To PAUSE-IN

EN45

MAKE CONNECTIONS

1 JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL

Connect the editing cable to the Remote PAUSE terminal.

JVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL BUT EQUIPPED WITH R.A. EDIT CONNECTOR

Connect the editing cable to the R.A.EDIT connector.

VCR OTHER THAN TYPE OR

Connect the editing cable to the RM-V716U/RM- V700U’s PAUSE-IN connector.

2 Insert a recorded tape into the camcorder and set the Power Switch to “PLAY”.

3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).

NOTE:

If your VCR has an S-Video input connector or a SCART connector compatible with Y/C signals, connect the camcorder and the VCR using the provided S-Video cable. This can improve the dubbed picture quality.

TV

RM-V716URM-V700U (provided with OR (optional) GR-SXM91A/ SXM81A/SX51A/

SXM92ED/

SXM82ED/ SX52ED only)

*Provided with GR-SXM91A/SXM81A/SX51A/ SXM92ED/SXM82ED/SX52ED only.

CONTINUED ON NEXT PAGE.