Remote sensor

Zoom Buttons

Up Button

SHIFT

Down

Left Button

Button

PLAY

PAUSE

Right Button

STOP

 

RM-V716U

 

(provided)

Normal playback

Press T

To move image,

press (Right) while keeping SHIFT held down.

EN41

Playback Zoom (GR-SXM91A/SXM81A/ SX51A/SXM92ED/SXM82ED/SX52ED only)

To magnify the recorded image up to 10X at any time during playback.

NOTES:

Use the RM-V716U remote control unit to perform this procedure.

Make sure that the TBC mode is activated (  pg. 34).

1 Press PLAY to find the scene of interest.

2 Press the Zoom Buttons (T/W) on the remote control. Make sure the remote control is pointed at the camcorder’s remote sensor. Pressing T zooms in.

To move the image on screen around to find a particular portion of the picture . . .

.... while holding down SHIFT, press (Left), (Right),

(Up) and (Down).

To End Zoom . . .

.... press and hold W until magnification returns to

normal. Or, press STOP and then press PLAY.

NOTES:

Zoom can also be used during still playback.

Due to digital image processing, the quality of the image may suffer.

After zooming in on a still video image, when normal playback is started, the zoomed-in effect is momentarily cancelled but then resumes, returning magnification to the previously set level.

Page 41
Image 41
JVC GR-SXM62ED, GR-SX51A Press Play to find the scene of interest, While holding down SHIFT, press Left, Right Up and Down