JVC GR-SXM91A, GR-SX52ED, GR-SX51A, GR-SXM81A 10 EN, Recording Mode Setting, Tape Length Setting

Set the Power Switch to “PRO.”, then press MENU.

10 EN

Select Wheel
							Power Switch
					MENU Button
			SP/LP Recording
			Mode Button
			Viewfinder
	SP				T 3 0	Tape length indicator
						Recording mode
						indicator
			Display
TE L E MACRO				OF F
TAPE		LENGTH				Menu Screen
				T 3 0
4RETURN
		TAPE L ENGTH				TAPE LENGTH
T 3 0						Setting Menu
T 4 5
T 5 0
T 6 0
EX I T
TE L E MACRO				OF F
TAPE		LENGTH		T 4 5

4RETURN

GETTING STARTED (cont.)

Recording Mode Setting

Set depending on your preference.

1 Set the Power Switch to “AUTO” or “PRO.”. Press SP/LP for more than 1 second. “SP” (Standard Play) provides higher picture and sound quality and is better for dubbing, while “LP” (Long Play) is more economical, providing twice the recording time.

NOTES:

●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.

●S-VHS/S-VHS ET recording is not possible when the recording mode is set to “LP” (
pg. 12, 26).

Tape Length Setting

Set the tape length according to the length of the tape used.

1

2 Rotate the Select Wheel to move the highlight bar to “TAPE LENGTH”, then press it. The TAPE LENGTH Setting Menu appears.

3 Rotate the Select Wheel to move the highlight bar to the correct tape length setting. T30=30 minutes of recording time, T45=45 minutes, T50=50 minutes and T60=60 minutes.

•To return to the previous setting, rotate the Select Wheel to move the highlight bar to “EXIT”.

4 Press the Select Wheel. The Menu Screen reappears with the highlight bar on “RETURN”. Press the Select Wheel again to close the Menu Screen.

NOTE:

The tape remaining time (
pg. 16) displayed in the viewfinder is correct only if the correct tape length has been selected.