12 EN
MENU Wheel
Power Switch
Display
REC MODE |
| REC MODE Menu |
|
SP
EP
EX I T
SP
Recording mode indicator
GETTING STARTED (cont.)
Recording Mode SettingSet the tape recording mode depending on your preference.1 Set the Power Switch to “
”. The power lamp comes on.
2 Press the MENU Wheel in. The Menu Screen appears.
3 Rotate the MENU Wheel to select “
TO SYSTEM MENU” and press it to display SYSTEM MENU.
4 Rotate the MENU Wheel to select “REC MODE” and press it. The REC MODE Menu appears. Select “SP” or “EP” by rotating the MENU Wheel and press it.
The Menu Screen reappears with the highlight bar on “
RETURN”. Press the MENU Wheel in to close the Menu Screen.
•“EP” (Extended Play) is more economical, providing three times the recording time.
NOTE:
If the recording mode is switched during recording, the playback picture will be blurred at the switching point.
Display |
|
| ||
|
|
|
|
|
TAPE LENGTH |
|
| TAPE LENGTH | |
|
|
| ||
T 2 0 | Menu | |||
T 3 0 |
|
| ||
T 3 5 |
|
| ||
T 4 0 |
|
| ||
EX I T |
|
| ||
| T 3 0 |
|
| Tape length |
|
|
| ||
|
|
|
| indicator |
1
2
3 Rotate the MENU Wheel to select the correct tape length setting.•T20=20 minutes•T30=30 minutes•T35=35 minutes•T40=40 minutes (in SP)4 Press the MENU Wheel in. The Menu Screen reappears with the highlight bar on “
RETURN”. Press the MENU Wheel in to close the Menu Screen.
NOTE:
The tape remaining time ( pg. 14) is correct only if the correct tape length has been selected.