4 EN

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset).

Available when the Power Switch is set to “” or “”.

Operating the Power Zoom Lever during the demonstration stops the demonstration temporarily. If the Power Zoom Lever is not moved for more than 1 minute after that, the demonstration will resume.

“DEMO MODE” remains “ON” even if the camcorder power is turned off.

To cancel Automatic Demonstration, set the Power Switch to “” and press the MENU Wheel in while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not have to go through the main Menu Screen). Rotate the MENU Wheel to select “OFF” and press it.

DEMO MODE

OF F

ON

EX I T

Setting Menu

NOTES:

●When a tape whose Erase Protection tab is in the position that allows recording is loaded in the camcorder, demonstration is not available.

●If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.

PROVIDED ACCESSORIES

•AC AdapterAP-V10U•Battery PackBN-V11U (GR-SXM535/SXM235 only) BN-V20U(GR-SXM335 only)•Shoulder Strap

•Cassette Adapter (VHS Playpak) C-P7U

•Lens Cap•AA (R6) Battery(for Cassette Adapter)