14 EN
During shooting
Power Switch
Recording Start/Stop Button
2 5M I N | Tape remaining | |
|
| time indicator |
|
| (Approximate) |
|
|
|
MIN |
| 120MIN |
| 119MIN |
|
|
(Now calculating)
0MIN
1MIN
2MIN
3MIN
(Blinking) (Blinking) (Blinking)
RECORDING Basic Recording
NOTE:
You should already have performed the procedures listed below. If not, do so before continuing.
●Power ( pg. 6)●Load A Cassette ( pg. 13)●Recording Mode Setting ( pg. 12)●Tape Length Setting ( pg. 12)●Grip Adjustment ( pg. 8)●Viewfinder Adjustment ( pg. 8)Shooting While Watching The Viewfinder
1 Make sure the LCD monitor is closed and locked. Press in the tabs on the lens cap to remove it. Set the Power Switch to “
” or “
”. The power lamp lights and the camcorder enters the
” appearsin the viewfinder while recording is in progress.To Stop Recording . . ..... press the Recording Start/Stop Button. The camcorder180°
BRIGHT Wheel
90° 
1 Make sure the LCD monitor is fully open. Press in the tabs on the lens cap to remove it. Set the Power Switch to “
” or “
”. The power lamp lights and the camcorder enters the
2 Tilt the LCD monitor upward/downward for best viewability and press the Recording Start/Stop Button. “
” appears in the LCD monitor while recording is in progress.
BR I GHT – – – – – – –
To Adjust The Brightness Of The LCD Monitor
.... rotate the BRIGHT Wheel until the brightlevel indicator on the display moves and the appropriate brightness is reached.
NOTE:
When you use the LCD monitor outdoors in direct sunlight, the LCD monitor may be difficult to see. If this happens, use the viewfinder instead.
To Stop Recording . . .
.... press the Recording Start/Stop Button. The camcorder
:Suitable for standard recording using NO special effects or manual adjustments.
: Allows you to set recording functions using the menus for more creative capabilities. OFF : Switches off the camcorder.