30 EN

Stop (5) Button

Rewind (2) Button

Play/Pause (4/6) Button

Fast-Forward (3) Button

BRIGHT Wheel

Power Zoom

Lever (VOL.)

Speaker

Set to “ ”.

PLAYBACK Basic Playback1 Load a tape ( pg. 13).
Set the Power Switch to “

”.

2 To start playback, press 4/6.

 

•To stop playback, press 5.

 

•Press 2to rewind, or 3to fast-forward the tape during Stop mode.

NOTES:

●The camcorder shuts off automatically after about5 minutes in Stop mode. To turn on again, set the PowerSwitch to “OFF”, then to “”.

●When the Power Switch is set to “” and the LCD monitor is opened at an angle of 60 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power.

●The playback picture can be viewed in the viewfinder

(with the LCD monitor shut), on the LCD monitor or on a connected TV ( pg. 32, 33).

●You can also view the playback picture on the LCD monitor with it flipped over and retracted.

●If a blank portion on the tape is played back, the screen may become black. This is not a malfunction.

LCD Monitor Brightness Adjustment: Rotate the BRIGHT Wheel towards “+” to brighten, or towards “–” to darken.

●The Bright Level Indicator is displayed under the Date/Time Display when you play back images recorded in Wide Mode ( pg. 23).

Speaker Volume Control: Slide the Power Zoom Lever (VOL.) towards “+” to turn up the volume, or towards “–” to turn down the volume.

●The Speaker Volume Indicator is displayed under the Date/Time Display when you play back images recorded in Wide Mode ( pg. 23).

Still Playback: Pauses during playback.1)Press 4/6during playback.2)To resume normal playback, press 4/6again.

●Noise bars will appear and the picture will become monochrome during Still Playback.

●If TBC ( pg. 31) is engaged, noise bars will not appear. This mode is called Fine Still (GR-SXM535/ SXM335 only).

Shuttle Search: Allows high-speed search in either direction.1)Press 3for forward or 2for reverse search during playback.2)To resume normal playback, press 4/6.

●During playback, press and hold 2or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●Noise bars appear and pictures may become monochrome or darken during Shuttle Search. This is normal.