Preparation before Use
Connecting the Camera to Your Computer
To set up the camera, fi rst connect it to your computer.
Required operating environment
Browser: Internet Explorer 9 or later
1Attach the supplied LAN cable to the camera.
MIC
RESET
DC
DIRECT WLAN LAN(OFF)
AV
ETHERENT
BATT.
2Connect the camera to your computer via the LAN cable.
3Set the network mode switch to [LAN•OFF].
DIRECT WLAN LAN(OFF) |
| PLUG IN | MIC |
RESET |
| ||
|
| POWER | DC |
| DIRECT WLAN | LAN(OFF) |
|
|
|
| AV |
| ETHERENT |
|
|
•If the network mode switch is set to [DIRECT] or [WLAN], the LAN terminal cannot be used.
•While the power is on, switching the network mode switch does not change the setting.
•Do not use cables (AV cable, microphone, etc.) with
•For other ways of connecting, see "Detailed User Guide".
Connecting the AC Adapter
Connect the supplied AC adapter to the DC connector.
MIC
RESET | PLUG IN |
|
| POWER | DC |
DIRECT WLAN | LAN(OFF) |
|
ETHERENT |
|
|
10 For more details, refer to the Detailed User Guide at http://manual3.jvckenwood.com/
GVLS1_basic_US.indd 10
12/08/08 9:36
