– 35 –
Auto Edit Recording
By using Auto Edit Recording, you can record disc tracks to
fit the tape. Auto Edit Recording makes a program by
selecting disc tracks in numerical order. However, to prevent
the end of the last track on the front side from being cut off,
the last track is selected so as to fit on the remaining tape
length.
• This function cannot be used for recording DVD and VCD.
On the unit ONLY:
1
Load discs with the label side up.
2
Press EDIT.
3
Press the disc number
button (DVD1, DVD2, or
DVD3) for the disc you
want to record from.
To change the tape length manually
If the tape length selected is not satisfactory, you can
change the tape length by turning 4 / ¢.
You can select the tape length among the following
— 40, 46, 50, 54, 60, 64, 70, 74, 80, 84, and 90.
4
Press SET.
• Each time you press the button, the tracks to
be recorded on the front side (“SIDE-A”)
and on the reverse side (“SIDE-B”) alternate.
5
Put a recordable cassette of appropriate
length into deck B.
6
Press REVERSE MODE so that the
Reverse Mode indicator lights up
like .
• Without turning on the Reverse Mode
( ), recording will stop when the front
side of the tape is recorded.
7
Press CD REC START.
“TAPE SIDE-A STAND-BY” appears, and
the (recording) indicator lights up
on the display.
Deck B starts recording then, and about 10 seconds later,
the DVD/VCD/CD player starts playing.
When the recording is done, “CD REC FINISHED”
appears on the display, and the DVD/VCD/CD player and
deck B stop.
• If a tape has not been rewound, deck B will rewind the
tape before it starts recording.
• A 10-second blank portion is automatically created at
the beginning of each side of the tape.
To stop recording, press REC START/STOP or 7‚ so that a
4-second blank portion is created on the recording tape.
(Remember a 4-second blank is important when using Music
Scan—see page 31.)
To cancel Auto Edit Recording
Press CANCEL/DEMO or 7 before or after recording.
The optimum tape length for the disc appears.
Tracks to be recorded on the
reverse side (SIDE-B) appear.
EN33-35.CA-MXDVA9&9R[A,B,UJ]_1 01.8.6, 7:48 PM35