– 16 –
RDS (Radio Data System) allows FM stations to send an
additional signal along with their regular program signals.
For example, the stations send their station names, as well as
information about what type of program they broadcast, such
as sports or music, etc.
When tuned to an FM station which provides the RDS
service, the RDS indicator lights up on the display.
With the unit, you can receive the following types of RDS
signals.
PS (Program Service):
Shows commonly known station names.
PTY (Program Type):
Shows types of broadcast programs.
RT (Radio Text):
Shows text messages the station sends.
EON (Enhanced Other Networks):
Provides the information about the types of the
programs sent by other RDS stations.
More about RDS
• Some FM stations do not provide RDS signals.
• RDS services vary among FM RDS stations. For details on RDS
services in your area, check with local radio stations.
• RDS may not work correctly if the received station is not
transmitting the signals properly or if the signal strength is weak.
Changing the RDS Information
You can see RDS information on the display while listening
to an FM station.
Press DISPLAY.
• Each time you press the button, the display
changes to show the following information:
If no PS, PTY, or RT signals are sent by a station
“NO PS,” “NO PTY,” or “NO RT” appears in the display.
If the unit takes time to show the RDS information
received from a station
“WAIT PS,” “WAIT PTY,” or “WAIT RT” may appear on the
display.
Searching for Programs by PTY Codes (PTY
Search)
One of the advantages of RDS is that you can locate a
particular kind of program by specifying the PTY codes.
• For details on the PTY codes, see “Appendix C—
Description of the PTY Codes” on page 49.
To search for a program using the PTY codes
REMEMBER you must preset FM RDS stations to use the
PTY codes. If not yet done, see page 15.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1 again.
On the remote control ONLY:
1
Press PTY/EON while holding
down SHIFT until “PTY” and
“SELECT” alternately appear on
the display.
• Each time you press the buttons, RDS
operation mode changes as follows:
2
Press CONTROL + or – until
the PTY code you want appears
on the display.
• Each time you press the button, the PTY codes change
as follows:
NEWS “ AFF AIRS “ INFO “ SPORT “
EDUCATE “ DRAMA “ CULTURE “
SCIENCE “ VARIED “ POP M “ R OCK M “
M.O.R. M “ LIGHT M “ CLASSICS “
OTHER M “ WEATHER “ FINANCE “
CHILDREN “ SOCIAL A “ RELIGION “
PHONE IN “ TRAVEL “ LEISURE “ JAZZ “
COUNTRY “ NATIONAL “ OLDIES “
FOLK M “ DOCUMENT “
(back to the beginning)
3
Press PTY/EON while holding down
SHIFT again.
While searching, “SEARCH” and the selected
PTY code alternate on the display.
The unit searches 30 preset FM stations, stops
when it finds the one you have selected
(“FOUND” appears), and tunes in that station.
• If no program is found, “NOT” and
“FOUND” appear on the display and the unit returns to
the last received station.
To stop searching any time during the process
Press PTY/EON while holding down SHIFT during search.
PS
(Program Service)
PTY
(Program Type)
RT
(Radio Text)
Station frequency
(or preset channel no.)
PTY SELECT EON SELECT
(See page 17.)
Canceled
+
+
Receiving FM Stations with RDS
—Only for CA-MXDVA9R Continued
EN11-17.CA-MXDVA9&9R[A,B,UJ]_1 01.8.6, 7:43 PM16