JVC GVT0144-005A Special cautions, Supplied accessories, Important cautions, Safety precautions

Special cautions

Notes on handling

7Important cautions

Installation of the system

•Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C.

•Leave sufficient distance between the system and the TV.

•Do not use the system in a place subject to vibration.

Power cord

•Do not handle the power cord with wet hands.

•A small amount of power is always consumed while the power cord is connected to the wall outlet.

•When unplugging the power cord from the wall outlet, always pull on the plug, not the power cord.

To prevent malfunctions of the system

•There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer.

•Do not insert any metallic object into the system.

•Do not use any non-standard shape disc (like a heart, flower or credit card, etc.) available on the market, because it may damage the system.

•Do not use a disc with tape, stickers, or paste on it, because it may damage the system.

Label sticker

Sticker

Paste

Note about copyright laws

Check the copyright laws in your country before recording from DVDs, VCDs, SVCDs, and CDs. Recording of copyrighted material may infringe copyright laws.

Note about copy guard system

DVDs are protected by copy guard system. When you connect the system to your VCR directly, the copy guard system activates and the picture may not be played back correctly.

Care of the cabinet

When cleaning the system, use a soft cloth and follow the relevant instructions on the use of chemically-coated cloths. Do not use benzene, thinner or other organic solvents including disinfectants. These may cause deformation or discoloring.

If water gets inside the system

Turn the system off and disconnect the power cord plug from the wall outlet, then call the store where you made your purchase. Using the system in this condition may cause fire or electrical shock.

7When condensation or water drops adhere to the lens

In any of the following cases, condensation or water drops may adhere to the lens to prevent the system from working properly:

•Immediately after starting to heat the room

•When the system is installed in a steamy or damp space

•When the system is suddenly moved from a cold place to a warm space

In any of these cases, leave the system turned on for 1 or 2 hours before use.

Supplied accessories

Check to be sure you have all of the supplied accessories.

The number in parentheses is the quantity of the pieces supplied. If anything is missing, contact your dealer immediately.

•Remote control (1)

•Batteries (2)

•FM antenna (1)

•AM loop antenna (1)

•Power cord (1)

•Composite video cord (1)

•Speaker cords (2)

•USB wireless transmitter (1)

•Extension cable for the USB wireless transmitter (1)

7Safety precautions

Avoid moisture, water and dust

Do not place the system in moist or dusty places.

Avoid high temperatures

Do not expose the system to direct sunlight and do not place it near a heating device.

When you are away

When away on travel or for other reasons for an extended period of time, disconnect the power cord plug from the wall outlet.

Do not block the vents

Blocking the vents may damage the system.

•Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “MLP Lossless”, and the double-D symbol are trademarks of Dolby Laboratories.

•“DTS” and “DTS 2.0+DIGITAL OUT” are registered trademarks of Digital Theater Systems, Inc.

•This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

2