Thank you for purchasing a JVC product. Before operation, please read the instructions carefully.

Precautions

•Install the System on a place which is level, dry, and neither too hot nor too cold; between 5°C and 35°C.

•Do not use the System in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or vibration.

•Leave sufficient distance between the System and the TV.

•Do not insert any metallic objects or liquids into the System.

•There are no user-serviceable parts inside. If anything goes wrong, disconnect the USB cable (or AC adaptor) and consult your dealer.

•Stains on the System should be wiped off with a soft cloth. If the System is heavily stained, wipe it with a cloth soaked in water diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•If water gets inside the System, turn the power off and disconnect the USB cable (or AC adaptor), then call the store where you purchased this System. Using the System in this condition may cause a fire or electrical shock.

•Since the System may deteriorate in quality, become damaged or get its paint peeled off, be careful about the following:

–DO NOT wipe it forcefully.

–DO NOT wipe it with thinners, benzines or other organic solvents including disinfectants.

–DO NOT apply any volatile substances such as insecticides to it.

–DO NOT allow any rubber or plastic to remain in contact with it for a long time.

About the built-in speakers

The speakers are magnetically shielded to avoid color distortions on TVs. If the color on a TV is distorted, perform the following procedure:

–Turn off the TV’s main power switch or unplug it before installing the System. Then wait at least 30 minutes before

turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above procedure. If this happens, move the System away from the TV.

Connection

 

 

 

 

Troubleshooting

For supplying the power:

 

 

 

 

If you have a problem with this System, check this list for a

• Connect the System to a computer using the USB cable

 

possible solution before calling for service.

•

(supplied), or

 

 

 

 

Power does not come on.

Connect an AC adaptor (not supplied).

 

 

 

 

 

=Connect the USB cable (or AC adaptor) securely.

 

NOTE

 

 

 

 

 

=Turn on the computer connected to the System.

 

 

 

 

 

 

•

 

 

 

 

No sound comes out of the speakers.

Do not use a USB hub to connect the System to a computer.

 

 

 

=Adjust the volume level.

•

If you connect both the USB cable and an AC adaptor, connect

 

 

 

 

 

 

 

 

the AC adaptor first. Otherwise the System may not work

 

 

 

 

 

 

 

 

 

Manufactured under license from Dolby Laboratories. Dolby,

 

correctly.

 

 

 

 

 

CAUTION

 

 

 

 

Pro Logic, and the double-D symbol are trademarks of Dolby

 

 

 

 

 

 

 

 

 

 

Laboratories.

DO NOT turn on the computer until all connections have been

 

 

 

 

 

 

 

 

made.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital output of an audio player for

 

 

 

 

 

 

 

 

 

 

 

Digital optical cable

 

 

 

 

playing 2-channel digital audio sources*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

* Compatible signal: 2-channel linear PCM

 

 

 

 

 

 

 

 

 

 

 

(not supplied)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(32 kHz, 44.1 kHz, and 48 kHz sampling

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

frequency). No multi-channel signal is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

playable.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stereo mini plug cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(not supplied)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analog output of

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

an audio player

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB cable (supplied)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AC adaptor (not supplied)

 

or USB port of a computer

 

Connect the AC adaptor to the wall outlet.

 

•

For supplying the power

 

 

 

 

 

 

 

 

 

 

 

 

•

For playing 2-channel digital audio sources

1