1Turn on the computer.
For details, refer to the Instruction manual of the computer.
2Press to turn on the power.
The standby lamp turns green.
3Press INPUT DIGITAL, INPUT ANALOG or INPUT USB AUDIO to select the source.
4Start playing back the connected equipment.
5Press VOLUME +/– to adjust the volume.
Enjoying Surround Mode
This System is equipped with Virtual Dolby Surround. In Surround Mode, it creates a rich surround sound effect with two speakers.
To activate Surround Mode, press SURROUND MODE 1/2. Pressing the button beeps...
–Once when SURROUND MODE 1 is selected, or
–Twice when SURROUND MODE 2 is selected.
•SURROUND MODE 1: Creates a surround sound effect.
•SURROUND MODE 2: Creates a richer surround sound
effect than SURROUND MODE 1.
English
CAUTION | – To cancel, press SURROUND OFF. |
| ||
Set the volume to the minimum level before starting playback. If | Turning off the operation sounds |
| ||
the volume is set to a high level, the sudden blast of sound may |
| |||
damage your hearing and blow out the speakers. | Press and hold SURROUND OFF until the standby lamp flashes | |||
| twice. The operation sounds are turned off. |
| ||
| • To restore the sounds, press and hold the button until the | |||
Standby lamp | standby lamp flashes once. |
| ||
2 |
|
|
| |
3 |
| 5 |
| |
| SURROUND MODE buttons | |||
When using an AC adaptor or a stereo mini plug cable | Specifications |
|
| |
When you use an AC adaptor or a stereo mini plug cable (not | Output power: |
|
| |
supplied), make sure that a core filter is attached to the DC cord | • USB connection: 1.5 W (0.75 W + 0.75 W) at 4 Ω (10% THD) | |||
end/the stereo mini plug cable end to reduce interference. | ||||
• AC adaptor connection: 5 W (2.5 W +2.5 W) at 4 Ω (10% THD) | ||||
If not, attach one of the supplied core filters (small) as shown in the | ||||
Speaker Type: |
|
| ||
illustration. |
|
| ||
Run the cable through the core filter, and wind the cable firmly, | ||||
Speaker: | 4 cm cone × 2 | |||
twice for DC cord end, once for stereo mini plug cable end, | ||||
Speaker Impedance: |
| 4 Ω | ||
inside the cutout of the core filter. |
| |||
Core filter (small) | Analog Input (ANALOG IN): | 125 mV/50 kΩ | ||
DC cord | Digital Input (DIGITAL IN): |
|
| |
5 cm | USB Input (USB IN): | DC 5 V | 500 mA | |
Power Source: | USB DC 5 V | 500 mA | ||
Core filter (small) |
| DC 6 V | 1 A (DC IN) | |
Dimensions (W × H × D): | 390 mm × 88 mm × 136 mm | |||
Stereo mini plug | Mass: |
| 0.5 kg | |
Accessories |
|
| ||
|
|
|
cable | USB cable (× 1) | |||
|
| 5 cm | ||
|
| Core filter (small × 2/large × 2*) | ||
|
|
| ||
|
| CAUTION | * Refer to “How to attach the core filter to the USB cable” on | |
|
| |||
|
| the attached information sheet. | ||
Do not damage the cord by applying excessive force when winding. | ||||
|
2