JVC LYT1341-001B EN, GZ-MC100 Attaching the Hand Strap, 12 EN GETTING STARTED, NOTE:, NOTE:

12 EN GETTING STARTED

Attaching the Hand Strap Attaching the Lens Cap

1 Thread the end of the strap through the eyelet.

2 Pass the other end through the loop.

NOTE:

When carrying the camera, pass your arm through the strap to prevent dropping the camera. Tighten the strap at your wrist by sliding the buckle.

To protect the lens, attach the provided lens cap to the camera as shown in the illustration.

NOTE:

To confirm the lens cap is on correctly make sure the cap is flush to the camera.