14 EN GETTING STARTED

Power

1 Set the power switch to OFF while pressing down the

lock button located on the switch.

This camera’s 2-way power supply system lets you

2 Slide and remove the battery cover A by hooking on

choose the most appropriate source of power. Do not use

the part with your finger.

provided power supply units with other equipment.

3 Insert the battery pack firmly into the battery pack mount

Charging the Battery Pack

until it locks into space in the direction of the arrow B.

4 Close the battery cover firmly until it locks.

 

 

5 Connect the AC adapter to the camera, then connect

 

the power cord to the AC adapter.

Battery Cover

6 Plug the power cord into an AC outlet. The power/

charge lamp on the camera blinks to indicate charging

 

has started.

 

7 When the power/charge lamp goes out, charging is

 

finished. Unplug the power cord from the AC outlet.

 

Disconnect the AC adapter from the camera.

Open the cover.

To detach the battery pack

Battery Pack

Open the battery cover, and remove the battery pack in

the direction of the arrow C by holding the part.

 

Protrusion

 

To DC

 

connector

 

AC Adapter

 

Power/Charge

 

Lock Button Lamp

 

Power Switch Power Cord

Battery pack

Charging time

 

 

BN-VM200U (provided)

Approx. 1 hr. 35 min.

 

 

To AC outlet