|
| Changing the Menu Settings |
| NOTE: |
|
|
|
| Information on the following pages ( pg. 26 – 31) are only |
You can change the menu settings to customize your |
| excerpts of menu settings. | ||
camera. Access the desired menu screen by following the |
| Refer to the advanced operation manual in the | ||
steps below, then change the various settings. |
| |||
|
|
|
| MODE |
|
| INFO |
|
| MENU |
w | r | Lock Button |
|
| |
|
| Power Switch |
|
| 49 |
t e
1 Select the operation mode.
For Recording Menus:
Set the power switch to while pressing down the lock button located on the switch.
For Playback Menus:
Set the power switch to while pressing down the lock button located on the switch.
2 Press MODE to select(video),(still image) or
(voice).
3 Press MENU. The menu screen appears.
4 Select the desired sub menu and menu item with rt and 49.
●To return to the normal screen, press MENU.
●To display the operation guide, press INFO when the menu screen is displayed. (The operation guide is not displayed depending on the type of the menu.)
●Even if the menu item is displayed, some item cannot be set depending on the selected mode (video/still image/voice, recording/playback). In this case, it cannot be advanced to sub menu or next menu.
Common Menus for All Modes
[ ] =
BASIC SETTING
PRESET
EXECUTE: Resets all settings to the
[CANCEL]: Returns to menu screen without executing reset.
DEMO MODE
OFF: Disables the function.
[ON]: Activates demonstration mode and shows various features on the display.
OPERATION
SOUND
OFF: Turns off operation sound.
BEEP: The beep sounds when the power is turned on or off, and at the beginning and end of recording. [MELODY]: Instead of a beep, a melody sounds when any operation is performed.